ECCOSHIELD產品廣泛應用于EMI/RFI領域，主要通過在視頻模塊，組件，波導和結構外殼中包含或排除電磁能量來工作，以達到理想的屏蔽效果。品牌有專業的研發實驗室以及對材料科學，化學，微波理論和測量的深入了解技術。其生產基地包括比利時Geel（公司總部），美國馬薩諸塞州Randolph和印度海德拉巴。

愛澤工業專業銷售EMI/RFI應用的ECCOSHIELD®品牌的各種產品。 這些產品通過在RF模塊和組件，波導和結構外殼中包含或排除電磁能量來工作。
ECCOSHIELD®產品系列提供了廣泛的體積電阻率，以達到理想的屏蔽效果。 產品可以作為非硬化填縫料，硅樹脂或乙烯基片材以及導電粘合劑和涂層.

集團產品線包括不僅吸收射頻能量，也包括低損耗電介質和高導電屏蔽材料類控制材料。
包含的產品系列有：
ECCOSORB®微波吸收材料
ECCOSTOCK®用于低損耗RF和微波應用的電介質材料
ECCOSHIELD®導電片，填縫劑，粘合劑和涂料
如果您需要了解更多詳細信息，請在愛澤工業http://www.ize-industries。。ｃｏｍ中檢索.

美國LAIRD涂料ECCOSHIELD® ES
ECCOSHIELD® ES is a highly conductive surface coating that is a fine silver based lacquer and is sufficiently fluid enough that it will readily flow into cracks. However, ECCOSHIELD® ES will not fill gross voids at joints or seams; use a caulking compound such as ECCOSHIELD® VY product.
ECCOSHIELD® ES was specifically formulated for RF shielding applications and is often used to improve the RF integrity of metal housings or screen rooms. By applying ECCOSHIELD® ES to joints, seams and contacting surfaces, it is possible to convert a reasonably good metal structure to one of greater than 100 dB insertion loss from 15 kHz to 10 GHz. Metal to metal contact can be improved significantly as the coating fills slight irregularities and makes such intimate contact with exposed metal that even corroded joints can be made acceptable RF seals. When applied to a non-conductor, surface resistivity is substantially less than 1 ohm/square. Successive coats decrease surface resistivity even further. ECCOSHIELD® ES adheres well to metals, plastics,ceramics,wood,andconcrete
CONDUCTIVE SURFACE COATING
Eccoshield ES is a highly conductive surface coating that is a fine silver based lacquer and issufficiently fluid enough to readily flow into cracks. Eccoshield ES will not fill gross voids atjoints or seams; use a caulking compound such as Eccoshield VY. Metal to metal contact isimproved significantly by applying Eccoshield ES. The coating fills slight irregularities andmakes such intimate contact with exposed metal that even corroded joints can be madeacceptable RF seals. Eccoshield ES adheres well to metals, plastics, ceramics, wood andconcrete. When applied to a non-conductor, surface resistivity is substantially less than1 ohm/square. Successive coats decrease surface resistivity even further. 
FEATURES AND BENEFITS
• Highly conductive coating
• Fluid consistency allows material to readilyflow into cracks to improve shielding
Effectiveness
MARKETS
• Commercial ecom
• Test and Measurement

APPLICATIONS
• Eccoshield ES was specifically formulated for RF shielding applications and is often used toimprove the RF integrity of metal housings or screen rooms.
• By applying Eccoshield ES to joints, seams, and contacting surfaces, it is possible toconvert a reasonably good metal structure to one of greater than 100 dB insertion lossfrom 15 kHz to 10 GHz
AVAILABILITY
• Please contact your local supplier as there might be regional differences with regard topackaging.
• Eccoshield ES is a hazardous material (flammable).
INSTRUCTIONS FOR USE
• Eccoshield ES can be brushed or sprayed, with adequate ventilation recommended.
When sprayed using standard spraying equipment, it can drive the silver particles intocrevices and other hard to reach places.
• If a diluent is needed, use methyl ethyl ketone MEK.
• Remove grease, oil, wax and other debris from the surface to be coated with a suitablesolvent or cleaning agent. If electrical contact is to be established with a metal base, themetal surface must be free from non-conductive films.
• Shake the contents of the container in which the Eccoshield ES is received in until it isuniform in consistency, then pour out the desired amount.
• Apply the Eccoshield ES to the prepared surface with either a brush or spraying
application
• The coating will normally air dry in one hour to a surface resistivity of less than 1ohm/square. Apply additional coats if needed.
• The handling of this product should present no problems if ordinary care is exercised toavoid breathing vapours, the skin is protected against contamination, swallowing isavoided and the eyes are protected.
• Do not use near an open flame as it is highly flammable. The flash point is 4 °C. Keep awayfrom direct sunlight, ovens, radiators, hot water, and other heat sources; hightemperatures may cause bursting of the container.

愛澤工業(IZE INDUSTRIES)*經銷、常用備件型號：
LAIRD導電填縫料ECCOSHIELD® VY
LAIRD導電片ECCOSHIELD® LSV
LAIRD導電膠ECCOSHIELD® RVS
LAIRD涂料ECCOSHIELD® ES

愛澤工業成立于2010年，定位于向良好制造工業提供制造技術和設備。代理經營*的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的協作團隊，為客戶提供良好解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的*渠道。

如果有任何關于美國LAIRD涂料ECCOSHIELD® ES的疑問，請隨時與我們，（021-3100 6702），我們將盡全力解決您的問題。
有關美國LAIRD涂料ECCOSHIELD® ES更詳細的信息或者購買美國LAIRD 相關產品，請愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries。。ｃｏｍ.